Do Not Disturb

Replacing the Clock

1.  Use a small phillips-head screwdriver to remove 4 chrome screws from back of clock.

2. Remove the knobs that adjust the hands and use a knife to cut off the white plastic piece exposed when you remove the black plastic knobs (so the time can’t be changed).

3. Use the screwdriver to remove the top screw that the handle mounts to and twist of the feet of the clock by hand, thus removing all three internal chrome screws. This will allow you to pick up the clock face.

4. Adjust the time to 11:15 (move 2 remaining hands anywhere that isn’t crowding any 1 hand).

5. Apply pressure to chrome center piece that holds all hands of clock (which may crack the back plastic where the battery is housed slightly). This keeps the hands stationary.

6. Install all three internal screws and then exterior screws, closing the clock back up again.

Frozen Dinner Box

1. Try to find a box that will fit inside of the dinner box once it is folded up to help the box keep its form. The box for the pillow case is a very good size for this. If you replace the pillow case, save the box for the frozen dinner box.

2. Remove the orange tape (one side at a time as I form the dinner box around the internal cardboard box) to reveal the adhesive underneath, and also add some super glue along the edges to help it hold.

Journal:

• Pictures of the Kidnapper's journal are attached below, in case those ever need to be re-written.